HP (ヒューレット・パッカード) DVD Writer dvd210i ソフトウェア ダウンロード 無料 (ver. 1.­72)

DVD200 Series Firmware Update Utility for HP DVD Writer dvd210i The upgrade contains all previous firmware revision changes and includes the following new features: Laser write strategies added for new 8x DVD+R media manufacturers.­ Without this new firmware version,­ the DVD200 may experience incompatibilities with these types of media.­ (The firmware update will NOT allow the DVD200 drive to write at 8x speeds.­ The DVD200's maximum recording speed is 2.­4x no matter what recordable DVD media is being used.­) Before Running the Update: The RecordNow software included on the DVD200 installation disc must be installed for the firmware update to operate successfully.­ Install RecordNow before running this update.­ DVD200e Owners: The DVD200e must be attached to a USB 1.­1 or USB 2.­0 port during the upgrade process.­ The firmware update will not function correctly if the DVD200e is on an IEEE-1394 port.­ After the firmware update,­ the DVD200e can be re-attached to the IEEE-1394 port.­ Instructions: Download the dvd200-172.­exe file to the computer containing the DVD200 drive.­ Once the file is fully downloaded,­ double-click the dvd200-172.­exe file to install and initiate the firmware update.­ Follow the on-screen directions to complete the DVD200 firmware update.­ Reminder: The DVD200 must have the power cycled off after the firmware update.­ Reset the DVD200i by shutting down and turning off the computer.­ Reset the DVD200e by shutting down the computer and manually unplugging,­ then re-plugging in the power cable into the back of the drive.­ Restart the computer after power has been cycled.­ Failure to cycle power may result in the DVD200 temporarily malfunctioning.­ Compatible devices: Q2116A